Flying Horse, Colorado
Patio Covers in Flying Horse, CO
A patio cover in Flying Horse turns an open deck or patio into a room you'll actually use during elevated ridge lots catch afternoon wind and full western sun.
Local · Family-owned · 5-star rated
Patio Covers built for Flying Horse homes
A patio cover in Flying Horse turns an open deck or patio into a room you'll actually use during elevated ridge lots catch afternoon wind and full western sun. We design solid-roof covers that tie into your existing roofline and louvered aluminum systems that open for sun and close for shade — sized to the west-facing lots get Pikes Peak sunsets and heavy evening sun load on your lot.
Covers here have to handle Colorado weather at 7,000 ft. We flash and waterproof the tie-in properly and pick finishes that match your house — the details that keep water out through freeze-thaw and hail seasons.
- Free on-site design consultation
- Written, itemized estimate
- Licensed and insured
- We stand behind our work
Other services in Flying Horse
Patio Covers in nearby areas
Patio Covers in Flying Horse, Colorado — designed and built around your home
All Custom Deck is one of the deck builders Colorado Springs Flying Horse homeowners have called on for over fifteen years. Family-owned, fully licensed and insured — every patio covers we touch is designed, engineered, and built by our own in-house crew.
Flying Horse is not a place to build to a template. Between elevated ridge lots catch afternoon wind and full western sun and moderate but real wind loads, every patio covers we build here is spec'd around the site, not a generic Colorado plan.
Our approach is simple: listen first, design before we build, engineer for real conditions, and finish every detail like it's our own home.
Ready to talk about your Flying Horse patio covers? We'll walk your The Village Center lot, sketch options on-site, and follow up with an itemized written estimate — no obligation.
Recently in Flying Horse
We've built patio covers for Flying Horse homeowners in Bell Mountain Ranch area, Flying Horse North, Cathedral Pines edge — projects sized to the rolling ridgelines north of town with long Front Range views, oriented around the Flying Horse Club and the west-facing lots get Pikes Peak sunsets and heavy evening sun load, and detailed to fit large custom and semi-custom homes. If your address is near any of those neighborhoods, chances are we've built something close by.
Our process
How we build your patio covers in Flying Horse
Every patio covers project in Flying Horse follows the same straightforward path — one that's shaped by the rolling ridgelines north of town with long Front Range views, elevated ridge lots catch afternoon wind and full western sun, and the character of large custom and semi-custom homes homes.
- 01
On-site consultation
We start on-site — walking your Flying Horse yard, listening to how you want to use the space, and measuring what's actually there. No template designs, no high-pressure quotes.
- 02
Personalized design & written estimate
We refine the design with you until it's right, then lock the scope in writing. No change-order surprises mid-build unless you ask for one.
- 03
Expert build
Our in-house crew builds every patio covers to handle Flying Horse's conditions — moderate but real wind loads, elevated ridge lots catch afternoon wind and full western sun, and elevation-driven UV load at 7,000 ft.
- 04
Final walkthrough & warranty
Final walkthrough is a proper checklist — hardware, finish, flashings, cleanup. Anything that isn't right, we fix before we leave.
Materials & finishes
Materials chosen for Flying Horse
Every patio covers we build in Flying Horse pairs the right materials with the site — the west-facing lots get Pikes Peak sunsets and heavy evening sun load, sandy clay over scattered rock, and how the build has to tie into large custom and semi-custom homes.
Solid Shingled Roof Covers
Roof-tied covers built to match your existing pitch, shingle, and fascia so the addition reads as original architecture.
Louvered Aluminum Systems
Powder-coated adjustable louvers for sun-to-shade control in seconds — a strong pick against elevated ridge lots catch afternoon wind and full western sun.
Cedar & Douglas Fir Beams
Timber beam covers for a warmer read on large custom and semi-custom homes. Kiln-dried and finished for our UV.
Insulated Roof Panels
Aluminum-sandwich roof panels that cut heat gain and rain noise — a good middle ground between solid roof and louvered.
Integrated Wiring & Fans
We frame for infrared heaters, ceiling fans, and recessed lighting so wiring runs are ready before the ceiling closes up.
Built for Flying Horse
Local conditions, real construction details
Building a long-lasting patio covers in Flying Horse isn't the same as building one in Denver or Phoenix. At 7,000 ft with rolling ridgelines north of town with long Front Range views, we engineer every patio covers for the site — footings sized below frost line, ledger boards flashed to keep meltwater off large custom and semi-custom homes siding, and fasteners rated for the temperature swings we get on the the Flying Horse Club side of town.
We know what the Flying Horse Club does to sightlines, how sandy clay over scattered rock affects footings, and which sides of the house pick up west-facing lots get Pikes Peak sunsets and heavy evening sun load. That's the difference between a stock design and a patio covers that actually belongs on your Flying Horse home.
Built for 7,000 ft
High-altitude UV fades untreated wood fast. We spec every Flying Horse patio covers with UV-stable capped composite and factory-finished materials rated for altitude sun.
Moderate wind exposure
Moderate but real wind loads — post spacing, hardware, and railing profiles are all specified around your specific lot.
Frost-depth footings
Piers poured below the local frost line so nothing heaves in spring thaw. Non-negotiable on sandy clay over scattered rock.
Hail-tolerant detailing
Composite tops, aluminum louvers, and steel-frame options that survive Colorado's hail season without cosmetic damage.
Tuned to your west-facing lots get Pikes Peak sunsets and heavy evening sun load
Deck layout, shade structures, and finish colors are picked around how sun tracks across your specific Flying Horse lot.
Patio Covers FAQs — Flying Horse
+ Solid roof or louvered — what's right for Flying Horse?
Solid roof gives you a real dry room and handles Colorado snow. Louvered aluminum opens the sky in summer and closes for shade — great in Flying Horse's west-facing lots get Pikes Peak sunsets and heavy evening sun load. Most clients pick solid on north-facing patios and louvered on the sunny sides.
+ Will a patio cover tie into my existing large custom and semi-custom homes roofline?
Yes — we design covers to read as part of the original house. Matching pitch, matching soffits and fascia, and shingles that blend into Flying Horse homes.
+ How does a cover hold up to hail in Flying Horse?
Shingled solid covers take hail like your house does — they're built the same way. Louvered aluminum panels are designed to take Colorado hail and stay functional through storm seasons.
+ Can I add heaters, fans, and lights to a Flying Horse patio cover?
Yes — we frame for infrared heaters, ceiling fans (worth it in Flying Horse's summer), and recessed lighting so wiring is easy to add.
+ Can I get a free quote for a patio cover in Flying Horse?
Yes. We come out, walk the space, and lay out both solid-roof and louvered options in a written scope so you can compare side by side.
+ Do covers work year-round in Flying Horse?
Yes — with elevated ridge lots catch afternoon wind and full western sun, a good cover adds shoulder-season time and gives you a shaded spot in July and August. Add a heater and it works into winter.